Walther PPKS Grips 380/32 acp "BASICS" Collection • All Colors • All USA Versions + Manurhin!
Item #BWS1001
Netticks Grips FFL Finger Ledge PPK/S Panel Grips with single pattern design in 1-part from our “Basics” Collection. This collection is for those looking for a simple design with minimal options. To recreate these grips with one of our other distinct patterns, or options not shown here you can easily use our (Custom Build Section) to make the grip set you desire, if you are unsure or uneasy ordering your custom set online you can always (CALL) and place your order. Please pay attention to the name, This is a Basic collection product. All other listings can be customized and have many more features and options available.
HRV Grips® “Basics” Collection
Each listing includes all available colors for this listing
Three (3) Pattern Choices: Checkered, Stippled, and Black Diamond Stipple
CHECKERED is the LEAST aggressive pattern option
STIPPLED is the standard aggressive HRV Grips® pattern
BLACK DIAMOND STIPPLE is our most aggressive pattern
Top Section: Laser Logo
LASER LOGO You will receive the Laser Logo as shown (on one or more of the grip pictures shown regardless of color) on the color YOU CHOOSE
REMOVABLE LOGO: You may choose to have the grips made without the Laser Logo, This will leave a smooth area at the top. There is NO cost reduction for this option. Please make the choice to remove the Laser Logo in the Form after adding to Cart.
Please note that pictures are representations with some options included, DO NOT assume a picture is what you will receive, READ EVERYTHING.
The grips come with everything needed to install onto your gun. Netticks Grips use Stainless Steel Hardware, New screw included.
Certain grips will have the additional options of Backstrap Engraving and/or Bottom Engraving. These items are available as a separate item purchase and will be available below the grip choice in the listing.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
Fits PPK/S models made by S&W, Ft Smith Arkansas, Interarms, and Manurhin. Note: ALL Walther PP (PP, PPK, & PPKS) products have a variation in production, this means you will likely have to do minor fitting for your firearm. If you are not comfortable with this procedure we highly recommend you have a gunsmith install your grips. You can also ask your local gun store if they have an account with HRV Customs and purchase your grips through them. Netticks Grips use Stainless Steel Hardware, New screw included. Walther PP models use the same grip frame as the PPK/S, some additional fitting may be required for use on the PP model series.
Fits Walther PPK/S in .380 & 32 acp caliber only.
All Models Version: This set is manufactured to fit the Smith & Wesson made PPK/S in .380 & 32 acp caliber as well as the Fort Smith, Arkansas, the Interarms model, and The Manurhin model PPK/S in .380 caliber. Note: Fitting to any version may also require minor sanding to the inside of the grips. Does NOT fit German made models. Does NOT fit 22lr models. Comes with new screw. If your Interarms or Manurhin model has a solid grip frame with no opening this grip will not fit.
To Clarify the “Light Walnut” listing that shows in this listing. Light Walnut is a special order we received from Altamont last year, this color was difficult to receive at the time and is available so we wanted to offer it until it is sold out. This color is very close in color to the standard walnut color shown, slightly lighter. These grips are similar in style, with the Altamont gripshaving a slightly more pronounced finger rest versus the Netticks finger ledge..
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
Item #BWS1001
Netticks Grips FFL Finger Ledge PPK/S Panel Grips with single pattern design in 1-part from our “Basics” Collection. This collection is for those looking for a simple design with minimal options. To recreate these grips with one of our other distinct patterns, or options not shown here you can easily use our (Custom Build Section) to make the grip set you desire, if you are unsure or uneasy ordering your custom set online you can always (CALL) and place your order. Please pay attention to the name, This is a Basic collection product. All other listings can be customized and have many more features and options available.
HRV Grips® “Basics” Collection
Each listing includes all available colors for this listing
Three (3) Pattern Choices: Checkered, Stippled, and Black Diamond Stipple
CHECKERED is the LEAST aggressive pattern option
STIPPLED is the standard aggressive HRV Grips® pattern
BLACK DIAMOND STIPPLE is our most aggressive pattern
Top Section: Laser Logo
LASER LOGO You will receive the Laser Logo as shown (on one or more of the grip pictures shown regardless of color) on the color YOU CHOOSE
REMOVABLE LOGO: You may choose to have the grips made without the Laser Logo, This will leave a smooth area at the top. There is NO cost reduction for this option. Please make the choice to remove the Laser Logo in the Form after adding to Cart.
Please note that pictures are representations with some options included, DO NOT assume a picture is what you will receive, READ EVERYTHING.
The grips come with everything needed to install onto your gun. Netticks Grips use Stainless Steel Hardware, New screw included.
Certain grips will have the additional options of Backstrap Engraving and/or Bottom Engraving. These items are available as a separate item purchase and will be available below the grip choice in the listing.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
Fits PPK/S models made by S&W, Ft Smith Arkansas, Interarms, and Manurhin. Note: ALL Walther PP (PP, PPK, & PPKS) products have a variation in production, this means you will likely have to do minor fitting for your firearm. If you are not comfortable with this procedure we highly recommend you have a gunsmith install your grips. You can also ask your local gun store if they have an account with HRV Customs and purchase your grips through them. Netticks Grips use Stainless Steel Hardware, New screw included. Walther PP models use the same grip frame as the PPK/S, some additional fitting may be required for use on the PP model series.
Fits Walther PPK/S in .380 & 32 acp caliber only.
All Models Version: This set is manufactured to fit the Smith & Wesson made PPK/S in .380 & 32 acp caliber as well as the Fort Smith, Arkansas, the Interarms model, and The Manurhin model PPK/S in .380 caliber. Note: Fitting to any version may also require minor sanding to the inside of the grips. Does NOT fit German made models. Does NOT fit 22lr models. Comes with new screw. If your Interarms or Manurhin model has a solid grip frame with no opening this grip will not fit.
To Clarify the “Light Walnut” listing that shows in this listing. Light Walnut is a special order we received from Altamont last year, this color was difficult to receive at the time and is available so we wanted to offer it until it is sold out. This color is very close in color to the standard walnut color shown, slightly lighter. These grips are similar in style, with the Altamont gripshaving a slightly more pronounced finger rest versus the Netticks finger ledge..
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
Item #BWS1001
Netticks Grips FFL Finger Ledge PPK/S Panel Grips with single pattern design in 1-part from our “Basics” Collection. This collection is for those looking for a simple design with minimal options. To recreate these grips with one of our other distinct patterns, or options not shown here you can easily use our (Custom Build Section) to make the grip set you desire, if you are unsure or uneasy ordering your custom set online you can always (CALL) and place your order. Please pay attention to the name, This is a Basic collection product. All other listings can be customized and have many more features and options available.
HRV Grips® “Basics” Collection
Each listing includes all available colors for this listing
Three (3) Pattern Choices: Checkered, Stippled, and Black Diamond Stipple
CHECKERED is the LEAST aggressive pattern option
STIPPLED is the standard aggressive HRV Grips® pattern
BLACK DIAMOND STIPPLE is our most aggressive pattern
Top Section: Laser Logo
LASER LOGO You will receive the Laser Logo as shown (on one or more of the grip pictures shown regardless of color) on the color YOU CHOOSE
REMOVABLE LOGO: You may choose to have the grips made without the Laser Logo, This will leave a smooth area at the top. There is NO cost reduction for this option. Please make the choice to remove the Laser Logo in the Form after adding to Cart.
Please note that pictures are representations with some options included, DO NOT assume a picture is what you will receive, READ EVERYTHING.
The grips come with everything needed to install onto your gun. Netticks Grips use Stainless Steel Hardware, New screw included.
Certain grips will have the additional options of Backstrap Engraving and/or Bottom Engraving. These items are available as a separate item purchase and will be available below the grip choice in the listing.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
Fits PPK/S models made by S&W, Ft Smith Arkansas, Interarms, and Manurhin. Note: ALL Walther PP (PP, PPK, & PPKS) products have a variation in production, this means you will likely have to do minor fitting for your firearm. If you are not comfortable with this procedure we highly recommend you have a gunsmith install your grips. You can also ask your local gun store if they have an account with HRV Customs and purchase your grips through them. Netticks Grips use Stainless Steel Hardware, New screw included. Walther PP models use the same grip frame as the PPK/S, some additional fitting may be required for use on the PP model series.
Fits Walther PPK/S in .380 & 32 acp caliber only.
All Models Version: This set is manufactured to fit the Smith & Wesson made PPK/S in .380 & 32 acp caliber as well as the Fort Smith, Arkansas, the Interarms model, and The Manurhin model PPK/S in .380 caliber. Note: Fitting to any version may also require minor sanding to the inside of the grips. Does NOT fit German made models. Does NOT fit 22lr models. Comes with new screw. If your Interarms or Manurhin model has a solid grip frame with no opening this grip will not fit.
To Clarify the “Light Walnut” listing that shows in this listing. Light Walnut is a special order we received from Altamont last year, this color was difficult to receive at the time and is available so we wanted to offer it until it is sold out. This color is very close in color to the standard walnut color shown, slightly lighter. These grips are similar in style, with the Altamont gripshaving a slightly more pronounced finger rest versus the Netticks finger ledge..
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.