Sig Sauer P226 HOGUE • Classic Wrap Around Grips
AT THIS TIME ALL ITEMS ARE BELOW OUR MINIMUM FOR SMOOTH ORDER SALES. Adding a smooth grip to your cart will show as $200-$300. Please see our policies for any additional information. Thank you.
Goncalo Alves is known as Zebrawood & Tigerwood
Pau Ferro is Known As Brazilian Rosewood
Altamont Blackwood 220D Grips available in Unique Section
Check out Our Unique Grip Section For Limited run and hard to find grips!
Hogue P226 grips will fit 9mm, 357SIG, or .40 cal pistols.
For optimum performance of an older SIG P226 with Hogue Grips it is recommended that the trigger return spring be replaced with the "new" style spring which is available from SIG.SIG redesigned the 226 frame in the mid 1990s and the new pistols come with a redesigned trigger return spring. SIG encourages the use of this new spring on older guns.
Your new Hogue Grip is designed to work with both the old and new frame and spring styles, however, the new spring works better under certain conditions. For this reason it is recommended that you use the new style spring for duty use or any other use in which maximum reliability is necessary.
Sig Sauer made a change to their P226 Elite Stainless frames at the bottom of the frame. The wood, aluminum and G10 grips can be modified if we do not have a current revision in stock. Please call Customer Service to order a grip indicating the revision needed. Revision D for our wood grips and Revision K for our aluminum and G10 grips and revision E for our rubber grips accommodate the SIG P226 Stainless Elite frames. You can see a picture of the new frame here. Updated 05/23/2018 NOTE: All HRV Customs grips are the newest revision
Grip screws should be torqued to 13-15 inch lbs. Blue loctite is suggested on the threads. A quality correct fitting 3/32" hex / Allen or slot driver is a must!
AT THIS TIME ALL ITEMS ARE BELOW OUR MINIMUM FOR SMOOTH ORDER SALES. Adding a smooth grip to your cart will show as $200-$300. Please see our policies for any additional information. Thank you.
Goncalo Alves is known as Zebrawood & Tigerwood
Pau Ferro is Known As Brazilian Rosewood
Altamont Blackwood 220D Grips available in Unique Section
Check out Our Unique Grip Section For Limited run and hard to find grips!
Hogue P226 grips will fit 9mm, 357SIG, or .40 cal pistols.
For optimum performance of an older SIG P226 with Hogue Grips it is recommended that the trigger return spring be replaced with the "new" style spring which is available from SIG.SIG redesigned the 226 frame in the mid 1990s and the new pistols come with a redesigned trigger return spring. SIG encourages the use of this new spring on older guns.
Your new Hogue Grip is designed to work with both the old and new frame and spring styles, however, the new spring works better under certain conditions. For this reason it is recommended that you use the new style spring for duty use or any other use in which maximum reliability is necessary.
Sig Sauer made a change to their P226 Elite Stainless frames at the bottom of the frame. The wood, aluminum and G10 grips can be modified if we do not have a current revision in stock. Please call Customer Service to order a grip indicating the revision needed. Revision D for our wood grips and Revision K for our aluminum and G10 grips and revision E for our rubber grips accommodate the SIG P226 Stainless Elite frames. You can see a picture of the new frame here. Updated 05/23/2018 NOTE: All HRV Customs grips are the newest revision
Grip screws should be torqued to 13-15 inch lbs. Blue loctite is suggested on the threads. A quality correct fitting 3/32" hex / Allen or slot driver is a must!
AT THIS TIME ALL ITEMS ARE BELOW OUR MINIMUM FOR SMOOTH ORDER SALES. Adding a smooth grip to your cart will show as $200-$300. Please see our policies for any additional information. Thank you.
Goncalo Alves is known as Zebrawood & Tigerwood
Pau Ferro is Known As Brazilian Rosewood
Altamont Blackwood 220D Grips available in Unique Section
Check out Our Unique Grip Section For Limited run and hard to find grips!
Hogue P226 grips will fit 9mm, 357SIG, or .40 cal pistols.
For optimum performance of an older SIG P226 with Hogue Grips it is recommended that the trigger return spring be replaced with the "new" style spring which is available from SIG.SIG redesigned the 226 frame in the mid 1990s and the new pistols come with a redesigned trigger return spring. SIG encourages the use of this new spring on older guns.
Your new Hogue Grip is designed to work with both the old and new frame and spring styles, however, the new spring works better under certain conditions. For this reason it is recommended that you use the new style spring for duty use or any other use in which maximum reliability is necessary.
Sig Sauer made a change to their P226 Elite Stainless frames at the bottom of the frame. The wood, aluminum and G10 grips can be modified if we do not have a current revision in stock. Please call Customer Service to order a grip indicating the revision needed. Revision D for our wood grips and Revision K for our aluminum and G10 grips and revision E for our rubber grips accommodate the SIG P226 Stainless Elite frames. You can see a picture of the new frame here. Updated 05/23/2018 NOTE: All HRV Customs grips are the newest revision
Grip screws should be torqued to 13-15 inch lbs. Blue loctite is suggested on the threads. A quality correct fitting 3/32" hex / Allen or slot driver is a must!
We Stock a limited supply of these grips at present. We are shipping on average 7-10 days from time of order. Most grips are ordered per job and they usually arrive in 5-7 days, however they can take up to 30 days to receive from Hogue. Our engraving services take 3-10 days. We have access to Hogue Inventory levels in real time, please call or contact us for a more accurate lead time. Our current inventory levels represent what is available to order from Hogue, this is NOT a real time inventory count and is not our own in stock inventory, we manually update levels daily. Sales across the country can and will affect these levels. Contacting us when ready to order is the best way to ensure your order can be processed in a reasonable time. Our Sig Sauer grips can be fitted with Medallions as an option. We carry the Original Sig round Logo Medallion in Real Silver Plated metal. Our standard pricing listed will include these Medallions installed. We have other optional Medallions, including some Legion medallions and a coated option. Please contact us for these options prior to purchase.