Walther PPKS Fingerledge Panel Grips All USA 380/32 acp Models • Arkansas, S&W, Interarms, Manurhin
Walther PPKS Fingerledge Panel grips from Netticks Grips are designed to fit all USA made versions of the popular PPKS model in .380 and .32acp - including: Ft Smith Arkansas, Smith & Wesson models, Interarms models, and will fit the French Manurhin models. Available in Blackwood, Red-Wood, Dark Walnut, & Blue Black-wood. *Note: Netticks Grips are manufactured using Engineered Wood, Color names are meant as identifiers and do not indicate a wood type.
To learn more about Engineered Wood visit our Wood Types page HERE
To see Netticks Grips for the 22 LR in matching colors press HERE
Please note: as a result of many years of production by the multiple manufacturers as listed above, and the inset design on the Walther PPKS (and PPK, PP) grip model, you may need to fine tune the fitment by lightly filing or sanding any and all solid (Wood, G10, Bonded Ivory, etc.) type of drop-in grips to your specific gun. This is very much a design issue with the style of grip frame used for the iconic Walther PP series of guns. HRV Grips ship with a disposable file for this purpose. Netticks Grips for Walther PPKS .380/32 acp are made with a slight palm swell and fingerledges that sweep to create a smooth grip for carry purposes. The fingerledges are not a blunt ledge.
Adding a smooth grip to your cart will show as $200. Please see our policies for any additional information. Thank you. Adding a smooth grip to your cart will result in a higher price than an engraved set.
Check out Our Unique Grip Section For Limited run and hard to find grips!
These grips are for the .380 and 32 acp models only, They can also be used for the original PP models. These grips will NOT fit the PPK frame or the new Walther PPKS .22 LR or any solid frame Walther PPKS without a cutout in the magazine well.
Netticks Grips uses all stainless steel hardware, a new Stainless Steel Screw included with grip purchase.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
Walther PPKS Fingerledge Panel grips from Netticks Grips are designed to fit all USA made versions of the popular PPKS model in .380 and .32acp - including: Ft Smith Arkansas, Smith & Wesson models, Interarms models, and will fit the French Manurhin models. Available in Blackwood, Red-Wood, Dark Walnut, & Blue Black-wood. *Note: Netticks Grips are manufactured using Engineered Wood, Color names are meant as identifiers and do not indicate a wood type.
To learn more about Engineered Wood visit our Wood Types page HERE
To see Netticks Grips for the 22 LR in matching colors press HERE
Please note: as a result of many years of production by the multiple manufacturers as listed above, and the inset design on the Walther PPKS (and PPK, PP) grip model, you may need to fine tune the fitment by lightly filing or sanding any and all solid (Wood, G10, Bonded Ivory, etc.) type of drop-in grips to your specific gun. This is very much a design issue with the style of grip frame used for the iconic Walther PP series of guns. HRV Grips ship with a disposable file for this purpose. Netticks Grips for Walther PPKS .380/32 acp are made with a slight palm swell and fingerledges that sweep to create a smooth grip for carry purposes. The fingerledges are not a blunt ledge.
Adding a smooth grip to your cart will show as $200. Please see our policies for any additional information. Thank you. Adding a smooth grip to your cart will result in a higher price than an engraved set.
Check out Our Unique Grip Section For Limited run and hard to find grips!
These grips are for the .380 and 32 acp models only, They can also be used for the original PP models. These grips will NOT fit the PPK frame or the new Walther PPKS .22 LR or any solid frame Walther PPKS without a cutout in the magazine well.
Netticks Grips uses all stainless steel hardware, a new Stainless Steel Screw included with grip purchase.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
Walther PPKS Fingerledge Panel grips from Netticks Grips are designed to fit all USA made versions of the popular PPKS model in .380 and .32acp - including: Ft Smith Arkansas, Smith & Wesson models, Interarms models, and will fit the French Manurhin models. Available in Blackwood, Red-Wood, Dark Walnut, & Blue Black-wood. *Note: Netticks Grips are manufactured using Engineered Wood, Color names are meant as identifiers and do not indicate a wood type.
To learn more about Engineered Wood visit our Wood Types page HERE
To see Netticks Grips for the 22 LR in matching colors press HERE
Please note: as a result of many years of production by the multiple manufacturers as listed above, and the inset design on the Walther PPKS (and PPK, PP) grip model, you may need to fine tune the fitment by lightly filing or sanding any and all solid (Wood, G10, Bonded Ivory, etc.) type of drop-in grips to your specific gun. This is very much a design issue with the style of grip frame used for the iconic Walther PP series of guns. HRV Grips ship with a disposable file for this purpose. Netticks Grips for Walther PPKS .380/32 acp are made with a slight palm swell and fingerledges that sweep to create a smooth grip for carry purposes. The fingerledges are not a blunt ledge.
Adding a smooth grip to your cart will show as $200. Please see our policies for any additional information. Thank you. Adding a smooth grip to your cart will result in a higher price than an engraved set.
Check out Our Unique Grip Section For Limited run and hard to find grips!
These grips are for the .380 and 32 acp models only, They can also be used for the original PP models. These grips will NOT fit the PPK frame or the new Walther PPKS .22 LR or any solid frame Walther PPKS without a cutout in the magazine well.
Netticks Grips uses all stainless steel hardware, a new Stainless Steel Screw included with grip purchase.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.