











Walther PPK Wrap-Around Grips for .380/32acp*
Walther PPK Panel grips from Netticks Grips are designed to fit all USA made versions of the popular PPK model in .380 caliber, they will also fit the .32acp however this caliber may use a longer rear spring, this will require fitting work at the lower part of the grip to function properly. NOTE: All Walther PP Family of grips come standard with the Walther Banner Logo. You have the option to remove the top logo in the form. Custom Top Engraving is priced based on request, please contact us prior for custom top engraving pricing.
HRV Customs and Netticks Grips highly recommend a qualified gunsmith to install these grips due to fluctuations in all internal areas of the PPK to avoid any issues with your gun. If you are comfortable in your skillset to install them yourself it is very important that you cycle and dryfire your pistol multiple times with snapcaps prior to taking it to the range, failure to test this way can potentially crack the grips during live fire.
These PPK grips are sized for the following .380 models: Ft Smith Arkansas, Smith & Wesson models, Interarms models, regardless of manufacturer you should assume some light fitting work may be required. Available in Blackwood, Red-Wood, Walnut, & Blue Black-wood. *Note: Netticks Grips are manufactured using Engineered Wood, Color names are meant as identifiers and do not indicate a wood type.
To learn more about Engineered Wood visit our Wood Types page HERE
Please note: as a result of many years of production by the multiple manufacturers as listed above, and the inset design on the Walther PPK grip model, you may need to fine tune the fitment by lightly filing or sanding any and all solid (Wood, G10, Bonded Ivory, etc.) type of drop-in grips to your specific gun. This is very much a design issue with the style of grip frame used for the iconic Walther PP Family of guns. HRV Grips ship with a disposable file for this purpose. Netticks Grips for Walther PPK .380/32 acp are made to properly fit the S&W PPK model, which has the largest opening in general, this assures a tight fit can be achieved in all variations.
Adding a smooth grip to your cart will show as $200. Please see our policies for any additional information. Thank you. Adding a smooth grip to your cart will result in a higher price than an engraved set.
Check out Our Unique Grip Section For Limited run and hard to find grips!
These grips are for the PPK .380 and 32 acp models only. These grips will NOT fit the PPK/s frame or ANY Walther .22 LR or any solid frame Walther without a cutout in the magazine well.
Netticks Grips uses all stainless steel hardware, a new Stainless Steel Screw included with grip purchase.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
We can pre-sand our PPK Grips for use on Fort Smith Arkansas Model PPK. You may still need to do some minor sanding to properly fit to your specific PPK but we will do the majority of sanding needed. Please add a note when purchasing or email us at hrvcustoms@gmail.com with your full name and date of purchase within 2 hours of purchasing. We cannot pre-sand for the 32acp model as this is not always required. Our equipment to make this cutout requires a groove to be cut into the bottom of the grips.
Walther PPK Panel grips from Netticks Grips are designed to fit all USA made versions of the popular PPK model in .380 caliber, they will also fit the .32acp however this caliber may use a longer rear spring, this will require fitting work at the lower part of the grip to function properly. NOTE: All Walther PP Family of grips come standard with the Walther Banner Logo. You have the option to remove the top logo in the form. Custom Top Engraving is priced based on request, please contact us prior for custom top engraving pricing.
HRV Customs and Netticks Grips highly recommend a qualified gunsmith to install these grips due to fluctuations in all internal areas of the PPK to avoid any issues with your gun. If you are comfortable in your skillset to install them yourself it is very important that you cycle and dryfire your pistol multiple times with snapcaps prior to taking it to the range, failure to test this way can potentially crack the grips during live fire.
These PPK grips are sized for the following .380 models: Ft Smith Arkansas, Smith & Wesson models, Interarms models, regardless of manufacturer you should assume some light fitting work may be required. Available in Blackwood, Red-Wood, Walnut, & Blue Black-wood. *Note: Netticks Grips are manufactured using Engineered Wood, Color names are meant as identifiers and do not indicate a wood type.
To learn more about Engineered Wood visit our Wood Types page HERE
Please note: as a result of many years of production by the multiple manufacturers as listed above, and the inset design on the Walther PPK grip model, you may need to fine tune the fitment by lightly filing or sanding any and all solid (Wood, G10, Bonded Ivory, etc.) type of drop-in grips to your specific gun. This is very much a design issue with the style of grip frame used for the iconic Walther PP Family of guns. HRV Grips ship with a disposable file for this purpose. Netticks Grips for Walther PPK .380/32 acp are made to properly fit the S&W PPK model, which has the largest opening in general, this assures a tight fit can be achieved in all variations.
Adding a smooth grip to your cart will show as $200. Please see our policies for any additional information. Thank you. Adding a smooth grip to your cart will result in a higher price than an engraved set.
Check out Our Unique Grip Section For Limited run and hard to find grips!
These grips are for the PPK .380 and 32 acp models only. These grips will NOT fit the PPK/s frame or ANY Walther .22 LR or any solid frame Walther without a cutout in the magazine well.
Netticks Grips uses all stainless steel hardware, a new Stainless Steel Screw included with grip purchase.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
We can pre-sand our PPK Grips for use on Fort Smith Arkansas Model PPK. You may still need to do some minor sanding to properly fit to your specific PPK but we will do the majority of sanding needed. Please add a note when purchasing or email us at hrvcustoms@gmail.com with your full name and date of purchase within 2 hours of purchasing. We cannot pre-sand for the 32acp model as this is not always required. Our equipment to make this cutout requires a groove to be cut into the bottom of the grips.

Walther PPK Panel grips from Netticks Grips are designed to fit all USA made versions of the popular PPK model in .380 caliber, they will also fit the .32acp however this caliber may use a longer rear spring, this will require fitting work at the lower part of the grip to function properly. NOTE: All Walther PP Family of grips come standard with the Walther Banner Logo. You have the option to remove the top logo in the form. Custom Top Engraving is priced based on request, please contact us prior for custom top engraving pricing.
HRV Customs and Netticks Grips highly recommend a qualified gunsmith to install these grips due to fluctuations in all internal areas of the PPK to avoid any issues with your gun. If you are comfortable in your skillset to install them yourself it is very important that you cycle and dryfire your pistol multiple times with snapcaps prior to taking it to the range, failure to test this way can potentially crack the grips during live fire.
These PPK grips are sized for the following .380 models: Ft Smith Arkansas, Smith & Wesson models, Interarms models, regardless of manufacturer you should assume some light fitting work may be required. Available in Blackwood, Red-Wood, Walnut, & Blue Black-wood. *Note: Netticks Grips are manufactured using Engineered Wood, Color names are meant as identifiers and do not indicate a wood type.
To learn more about Engineered Wood visit our Wood Types page HERE
Please note: as a result of many years of production by the multiple manufacturers as listed above, and the inset design on the Walther PPK grip model, you may need to fine tune the fitment by lightly filing or sanding any and all solid (Wood, G10, Bonded Ivory, etc.) type of drop-in grips to your specific gun. This is very much a design issue with the style of grip frame used for the iconic Walther PP Family of guns. HRV Grips ship with a disposable file for this purpose. Netticks Grips for Walther PPK .380/32 acp are made to properly fit the S&W PPK model, which has the largest opening in general, this assures a tight fit can be achieved in all variations.
Adding a smooth grip to your cart will show as $200. Please see our policies for any additional information. Thank you. Adding a smooth grip to your cart will result in a higher price than an engraved set.
Check out Our Unique Grip Section For Limited run and hard to find grips!
These grips are for the PPK .380 and 32 acp models only. These grips will NOT fit the PPK/s frame or ANY Walther .22 LR or any solid frame Walther without a cutout in the magazine well.
Netticks Grips uses all stainless steel hardware, a new Stainless Steel Screw included with grip purchase.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
We can pre-sand our PPK Grips for use on Fort Smith Arkansas Model PPK. You may still need to do some minor sanding to properly fit to your specific PPK but we will do the majority of sanding needed. Please add a note when purchasing or email us at hrvcustoms@gmail.com with your full name and date of purchase within 2 hours of purchasing. We cannot pre-sand for the 32acp model as this is not always required. Our equipment to make this cutout requires a groove to be cut into the bottom of the grips.
We Stock these grips with and without Logos. If you want logos on your grips it is important to purchase them with Logos. We cannot engrave logos onto blank grips. Grips are made in Blackwood, Rosewood, Walnut. Only materials shown in color selection box are currently available.



