














Walther PPK Grips 380/32 acp "BASICS" Collection • All Colors • All USA Versions※
Item #BWK1001
Netticks Grips PPK Wrap-around Grips with single pattern design in 1-part from our “Basics” Collection. This collection is for those looking for a simple design with minimal options. To recreate these grips with one of our other distinct patterns, or options not shown here you can easily use our (Custom Build Section) to make the grip set you desire, if you are unsure or uneasy ordering your custom set online you can always (CALL) and place your order. Please pay attention to the name, This is a Basic collection product. All other listings can be customized and have many more features and options available. Available in Blackwood, Red-Wood, Walnut, & Blue Black-wood. *Note: Netticks Grips are manufactured using Engineered Wood, Color names are meant as identifiers and do not indicate a wood type.
To learn more about Engineered Wood visit our Wood Types page HERE
HRV Grips® “Basics” Collection
Each listing includes all available colors for this listing
Three (3) Pattern Choices: Checkered, Stippled, and Black Diamond Stipple
CHECKERED is the LEAST aggressive pattern option
STIPPLED is the standard aggressive HRV Grips® pattern
BLACK DIAMOND STIPPLE is our most aggressive pattern
Top Section: Laser Logo
LASER LOGO You will receive the Laser Logo as shown (on one or more of the grip pictures shown regardless of color) on the color YOU CHOOSE
REMOVABLE LOGO: You may choose to have the grips made without the Laser Logo, This will leave a smooth area at the top. There is NO cost reduction for this option. Please make the choice to remove the Laser Logo in the Form after adding to Cart.
Please note that pictures are representations with some options included, DO NOT assume a picture is what you will receive, READ EVERYTHING.
The grips come with everything needed to install onto your gun. Netticks Grips use Stainless Steel Hardware, New screw included.
Certain grips will have the additional options of Backstrap Engraving and/or Bottom Engraving. These items are available as a separate item purchase and will be available below the grip choice in the listing.
Netticks Grips uses all stainless steel hardware, a new Stainless Steel Screw included with grip purchase.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
※ Walther PPK Panel grips from Netticks Grips are designed to fit all USA made versions of the popular PPK model in .380 caliber, they will also fit the .32acp however this caliber may use a longer rear spring, this will require fitting work at the lower part of the grip to function properly. NOTE: All Walther PP Family of grips come standard with the Walther Banner Logo. You have the option to remove the top logo in the form. Custom Top Engraving is priced based on request, please contact us prior for custom top engraving pricing.
HRV Customs and Netticks Grips highly recommend a qualified gunsmith to install these grips due to fluctuations in all internal areas of the PPK to avoid any issues with your gun. If you are comfortable in your skillset to install them yourself it is very important that you cycle and dryfire your pistol multiple times with snapcaps prior to taking it to the range, failure to test this way can potentially crack the grips during live fire.
These PPK grips are sized for the following .380 models: Ft Smith Arkansas, Smith & Wesson models, Interarms models, regardless of manufacturer you should assume some light fitting work may be required, with possible additional fitting work for 32acp models.
Additionally, as a result of many years of production by the multiple manufacturers as listed above, and the inset design on the Walther PPK grip model, you may need to fine tune the fitment by lightly filing or sanding any and all solid (Wood, G10, Bonded Ivory, etc.) type of drop-in grips to your specific gun. This is very much a design issue with the style of grip frame used for the iconic Walther PP Family of guns. HRV Grips ship with a disposable file for this purpose. Netticks Grips for Walther PPK .380/32 acp are made to properly fit the S&W PPK model, which has the largest opening in general, this assures a tight fit can be achieved in all variations.
These grips are for the PPK .380 and 32 acp models only. These grips will NOT fit the PPK/s frame or ANY Walther .22 LR or any solid frame Walther without a cutout in the magazine well.
Item #BWK1001
Netticks Grips PPK Wrap-around Grips with single pattern design in 1-part from our “Basics” Collection. This collection is for those looking for a simple design with minimal options. To recreate these grips with one of our other distinct patterns, or options not shown here you can easily use our (Custom Build Section) to make the grip set you desire, if you are unsure or uneasy ordering your custom set online you can always (CALL) and place your order. Please pay attention to the name, This is a Basic collection product. All other listings can be customized and have many more features and options available. Available in Blackwood, Red-Wood, Walnut, & Blue Black-wood. *Note: Netticks Grips are manufactured using Engineered Wood, Color names are meant as identifiers and do not indicate a wood type.
To learn more about Engineered Wood visit our Wood Types page HERE
HRV Grips® “Basics” Collection
Each listing includes all available colors for this listing
Three (3) Pattern Choices: Checkered, Stippled, and Black Diamond Stipple
CHECKERED is the LEAST aggressive pattern option
STIPPLED is the standard aggressive HRV Grips® pattern
BLACK DIAMOND STIPPLE is our most aggressive pattern
Top Section: Laser Logo
LASER LOGO You will receive the Laser Logo as shown (on one or more of the grip pictures shown regardless of color) on the color YOU CHOOSE
REMOVABLE LOGO: You may choose to have the grips made without the Laser Logo, This will leave a smooth area at the top. There is NO cost reduction for this option. Please make the choice to remove the Laser Logo in the Form after adding to Cart.
Please note that pictures are representations with some options included, DO NOT assume a picture is what you will receive, READ EVERYTHING.
The grips come with everything needed to install onto your gun. Netticks Grips use Stainless Steel Hardware, New screw included.
Certain grips will have the additional options of Backstrap Engraving and/or Bottom Engraving. These items are available as a separate item purchase and will be available below the grip choice in the listing.
Netticks Grips uses all stainless steel hardware, a new Stainless Steel Screw included with grip purchase.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
※ Walther PPK Panel grips from Netticks Grips are designed to fit all USA made versions of the popular PPK model in .380 caliber, they will also fit the .32acp however this caliber may use a longer rear spring, this will require fitting work at the lower part of the grip to function properly. NOTE: All Walther PP Family of grips come standard with the Walther Banner Logo. You have the option to remove the top logo in the form. Custom Top Engraving is priced based on request, please contact us prior for custom top engraving pricing.
HRV Customs and Netticks Grips highly recommend a qualified gunsmith to install these grips due to fluctuations in all internal areas of the PPK to avoid any issues with your gun. If you are comfortable in your skillset to install them yourself it is very important that you cycle and dryfire your pistol multiple times with snapcaps prior to taking it to the range, failure to test this way can potentially crack the grips during live fire.
These PPK grips are sized for the following .380 models: Ft Smith Arkansas, Smith & Wesson models, Interarms models, regardless of manufacturer you should assume some light fitting work may be required, with possible additional fitting work for 32acp models.
Additionally, as a result of many years of production by the multiple manufacturers as listed above, and the inset design on the Walther PPK grip model, you may need to fine tune the fitment by lightly filing or sanding any and all solid (Wood, G10, Bonded Ivory, etc.) type of drop-in grips to your specific gun. This is very much a design issue with the style of grip frame used for the iconic Walther PP Family of guns. HRV Grips ship with a disposable file for this purpose. Netticks Grips for Walther PPK .380/32 acp are made to properly fit the S&W PPK model, which has the largest opening in general, this assures a tight fit can be achieved in all variations.
These grips are for the PPK .380 and 32 acp models only. These grips will NOT fit the PPK/s frame or ANY Walther .22 LR or any solid frame Walther without a cutout in the magazine well.
Item #BWK1001
Netticks Grips PPK Wrap-around Grips with single pattern design in 1-part from our “Basics” Collection. This collection is for those looking for a simple design with minimal options. To recreate these grips with one of our other distinct patterns, or options not shown here you can easily use our (Custom Build Section) to make the grip set you desire, if you are unsure or uneasy ordering your custom set online you can always (CALL) and place your order. Please pay attention to the name, This is a Basic collection product. All other listings can be customized and have many more features and options available. Available in Blackwood, Red-Wood, Walnut, & Blue Black-wood. *Note: Netticks Grips are manufactured using Engineered Wood, Color names are meant as identifiers and do not indicate a wood type.
To learn more about Engineered Wood visit our Wood Types page HERE
HRV Grips® “Basics” Collection
Each listing includes all available colors for this listing
Three (3) Pattern Choices: Checkered, Stippled, and Black Diamond Stipple
CHECKERED is the LEAST aggressive pattern option
STIPPLED is the standard aggressive HRV Grips® pattern
BLACK DIAMOND STIPPLE is our most aggressive pattern
Top Section: Laser Logo
LASER LOGO You will receive the Laser Logo as shown (on one or more of the grip pictures shown regardless of color) on the color YOU CHOOSE
REMOVABLE LOGO: You may choose to have the grips made without the Laser Logo, This will leave a smooth area at the top. There is NO cost reduction for this option. Please make the choice to remove the Laser Logo in the Form after adding to Cart.
Please note that pictures are representations with some options included, DO NOT assume a picture is what you will receive, READ EVERYTHING.
The grips come with everything needed to install onto your gun. Netticks Grips use Stainless Steel Hardware, New screw included.
Certain grips will have the additional options of Backstrap Engraving and/or Bottom Engraving. These items are available as a separate item purchase and will be available below the grip choice in the listing.
Netticks Grips uses all stainless steel hardware, a new Stainless Steel Screw included with grip purchase.
All products are made to fit the brand and model listed. The Product name is used solely for identification of the model they will fit. We have no association with any manufacturer, nor do we claim the product to be made by or for the manufacturer.
※ Walther PPK Panel grips from Netticks Grips are designed to fit all USA made versions of the popular PPK model in .380 caliber, they will also fit the .32acp however this caliber may use a longer rear spring, this will require fitting work at the lower part of the grip to function properly. NOTE: All Walther PP Family of grips come standard with the Walther Banner Logo. You have the option to remove the top logo in the form. Custom Top Engraving is priced based on request, please contact us prior for custom top engraving pricing.
HRV Customs and Netticks Grips highly recommend a qualified gunsmith to install these grips due to fluctuations in all internal areas of the PPK to avoid any issues with your gun. If you are comfortable in your skillset to install them yourself it is very important that you cycle and dryfire your pistol multiple times with snapcaps prior to taking it to the range, failure to test this way can potentially crack the grips during live fire.
These PPK grips are sized for the following .380 models: Ft Smith Arkansas, Smith & Wesson models, Interarms models, regardless of manufacturer you should assume some light fitting work may be required, with possible additional fitting work for 32acp models.
Additionally, as a result of many years of production by the multiple manufacturers as listed above, and the inset design on the Walther PPK grip model, you may need to fine tune the fitment by lightly filing or sanding any and all solid (Wood, G10, Bonded Ivory, etc.) type of drop-in grips to your specific gun. This is very much a design issue with the style of grip frame used for the iconic Walther PP Family of guns. HRV Grips ship with a disposable file for this purpose. Netticks Grips for Walther PPK .380/32 acp are made to properly fit the S&W PPK model, which has the largest opening in general, this assures a tight fit can be achieved in all variations.
These grips are for the PPK .380 and 32 acp models only. These grips will NOT fit the PPK/s frame or ANY Walther .22 LR or any solid frame Walther without a cutout in the magazine well.